51 16 263 Removing and installing upper rear console trim (long version)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Insert special tool 00 9 340 between trim (1) and upper/side rear console.

Unclip trim (1) towards rear from retainers (2) and feed out.

Fig 1: Unclipping Trim Towards Rear From Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) must not be missing or damaged.

Fig 2: Identifying Clips

Courtesy of BMW OF NORTH AMERICA, INC.