51 16 201 Replacing storage compartment

Necessary preliminary tasks: 

• Remove STORAGE COMPARTMENT 
• Remove CONTROLLER .

Disconnect plug (1).

Release screws (2) and lift out insert (3).

Fig 1: Identifying Screws And Plug

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on inside of storage compartment and remove trim (2).

Fig 2: Identifying Screws On Inside Of Storage Compartment

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) on inside of storage compartment and remove trim (2).

Fig 3: Identifying Nuts On Inside Of Storage Compartment

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, lever out trim (1) and release screw underneath.

Release screws (2) and feed out guide cover (3) towards rear.

Fig 4: Identifying Screws And Guide Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Version with center armrest/storage tray: 

Release screws (1).

Release screws (2) and remove bracket (3).

Fig 5: Identifying Screws And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Feed out center armrest (1) with storage tray (2) towards top rear.

Fig 6: Feed out center armrest (1) with storage tray (2) towards top rear

Courtesy of BMW OF NORTH AMERICA, INC.

Security version: 

Cut storage compartment as illustrated (1).

If necessary, replace faulty retaining clips (2).

Fig 7: Identifying Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.