51 23 160 Removing and installing/replacing arrester hook on engine hood

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Raise bonnet/hood lid.

Release screws (1) and remove arrester hook (2).

Tightening torque: see 1AZ in 51 23 HOOD/BONNET LOCKS

Fig 1: Identifying Arrester Hook Screws

Courtesy of BMW OF NORTH AMERICA, INC.