51 71... Removing and installing/replacing (lower) front wheel arch cover on right

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Turn steering wheel/front wheel to left.

Release screws (1).

Tightening torque:

screw: 3 Nm

nut: 2.5 Nm

Remove wheel arch trim (2) under assembly underside protection at side rear.

Fig 1: Identifying Wheel Arch Trim Screws

Courtesy of BMW OF NORTH AMERICA, INC.