LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1813 (Body Equipment - Repair) >> Front Lid Insulation Lining >> 51 48... Notes for bonding sound insulation (SI), doors >> Handling adhesive area on inner door panel

Handling adhesive area on inner door panel

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
ADHESIVE APPLICATION REFERENCE CHART

Adhesive Cleaning
  1. Butyl bead applied to sound insulation with protective film
  2. Butyl mini-round profile Ø 3 mm from the roller
  3. Butyl round profile Ø 6 mm from the roller
  1. Cleaning agent R2

    Under no circumstances: paint thinning 

  2. Carry out bonding only after an air drying time ≥ 1 min. Air drying time may be omitted if the entire bonding surface is wiped with a dry cloth
  3. After cleaning, the bonding surface may not be touched with hands or fouled again
scientia non olet · About LEMON Manuals