51 11... Removing and installing/replacing front fog lamp trim (M aerodynamic kit)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Partially fit special tool 64 1 020 as illustrated.

Lever out fog lamp trim (2) at retaining lugs (1).

Feed fog lamp trim (2) out of outer bracket (3) and remove from bumper trim (4).

Fig 1: Lever Out Fog Lamp Trim At Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) and outer guide (2) of fog lamp trim (3) must not be damaged.

Fig 2: Identifying Retaining Lugs And Outer Guide Of Fog Lamp Trim

Courtesy of BMW OF NORTH AMERICA, INC.