51 47... Removing and installing/replacing left or right underbody panelling
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Hexagon screw in the tunnel bridge area is designed with different washer diameters.
Release plastic nuts.
Release screws (1 to 3).
If necessary, release screw (5).
Release screws (4) and remove underbody panelling in direction of arrow.
Installation:
Replace damaged plastic nuts.