LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1810 (Wheel And Tires - Repair) >> Tires >> 36 12 084 Replacing sealant bottle of M-Mobility system (version 1)

36 12 084 Replacing sealant bottle of M-Mobility system (version 1)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M5, 2010 BMW 550i, 2009 BMW M5, 2009 BMW 550i, and 2008 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This work step describes how the sealant bottle is replaced within the framework of inspection (M-Mobility system not used).
If the M-Mobility system has been used, also replace the transparent tire inflation hose.

Remove seal film (1). Not necessary if M-Mobility system has already been used.

Installation: 

Replace seal film.

Fig 1: Removing Seal Film
G04748061Courtesy of BMW OF NORTH AMERICA, INC.

Release Torx threaded bolts (1) and raise cover as far as possible.

Fig 2: Identifying Torx Threaded Bolts
G04748062Courtesy of BMW OF NORTH AMERICA, INC.

Release hexagon nut (1), grip nut firmly from underside.

Fig 3: Identifying Hexagon Nut
G04748063Courtesy of BMW OF NORTH AMERICA, INC.

Lift sealant bottle out.

Fig 4: Lifting Sealant Bottle Out
G04748064Courtesy of BMW OF NORTH AMERICA, INC.

Ensure that hose is laid without any kinks.

Fig 5: Identifying Hose
G04748065Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: Note the expiration date when installing a new sealant bottle.
Fig 6: Identifying Expiration Date On Sealant Bottle
G04748066Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals