35 40 001 Removing and installing/replacing accelerator pedal module

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Unscrew screw.

Pull accelerator pedal module upwards out of fixture.

Installation:

Tightening torque, 35 40 1AZ. See 35 40 Pedals .

Fig 1: Pulling Accelerator Pedal Module

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off plug (1).

Remove accelerator pedal module.

Fig 2: Pulling Plug

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Accelerator pedal module can only be replaced completely with adapter plate.