33 55 041 Replacing anti-roll bar link for anti-roll bar on left or right
WARNING: This page is about a different car, the 2009 BMW 550i and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Release nut (1); if necessary, grip at Torx socket.
Installation:
Replace self-locking nut.
Tightening torque 33 55 2AZ . See 33 55 STABILIZER BAR .
Release nut (2); if necessary, grip at Torx socket.
Remove stabilizer link.
Installation:
Replace self-locking nut.
Tightening torque 33 55 2AZ . See 33 55 STABILIZER BAR .