32 41... Instructions for removing and installing ear clips

Special tools required: 

• 32 1 260  . See STEERING AND WHEEL ALIGNMENT - SPECIAL TOOLS .

To remove an ear clip, place special tool 32 1 260  at right angles to ear and cut ear open.

Fig 1: Identifying Special Tool (32 1 260)

Courtesy of BMW OF NORTH AMERICA, INC.

The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.

Fig 2: Identifying Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Attach hook fastener and press ear together with special tool 32 1 260  .

Fig 3: Pressing Hook With Special Tool (32 1 260)

Courtesy of BMW OF NORTH AMERICA, INC.

Side cutter of special tool 32 1 260  can be used in areas which are difficult to access.

Fig 4: Identifying Special Tool (32 1 260)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 5: Identifying Clip Gap

Courtesy of BMW OF NORTH AMERICA, INC.