23 42... Removing hydraulic pump relay (SMG)

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove right fresh air duct. See 64 31 053 REMOVING AND INSTALLING OR REPLACING FRESH AIR DUCT .

Unlock stopper (1) in direction of arrow.

Unfasten screws.

Lift out cover (2).

Fig 1: Unlocking Stopper

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect relay (1).

Fig 2: Identifying Relay

Courtesy of BMW OF NORTH AMERICA, INC.