23..... Universal transmission retaining bridge

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 1 450 . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
24 0 200 . See AUTOMATIC TRANSMISSION - SPECIAL TOOLS .

NOTE:

The transmission retaining bridge 24 0 200 is suitable for both manual and automatic transmissions

IMPORTANT: Adapters and spindles must be adapted for positive locking to the transmission.
(Risk of injury)

Adapt adapters (1) and spindle with thrust piece (3) to transmission.

Adapt length with slide (2).

Screw in spindle (4).

IMPORTANT: Before mounting on assembly stand 00 1 450, check retaining bridge for secure seating.

Fig 1: Identifying Adapt Adapters And Spindle With Thrust Piece

Courtesy of BMW OF NORTH AMERICA, INC.