18 00 020 Removing and installing complete exhaust system (N62)
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required: See 31 2 220 SUPPORT PLATE .
- 31 2 220
WARNING:
Scalding hazard!
Only perform this work after engine has cooled down.
Danger of injury!
Removal of the exhaust system must be carried out with the assistance of a second person.
Weight of exhaust system is approx. 40 kg.
Only perform this work after engine has cooled down.
Danger of injury!
Removal of the exhaust system must be carried out with the assistance of a second person.
Weight of exhaust system is approx. 40 kg.
Support exhaust system with special tool 31 2 220.
Unscrew nuts (1).
Unscrew nuts (2).
Unscrew nut (1).
Unscrew nuts.
Detach hose (1) of vacuum unit.
Unfasten nut.
Unfasten screws.
Remove reinforcement plate (1).
Lower exhaust system carefully.