17 11 000 Removing and installing radiator (N62)
WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Danger of scalding!
Only perform this work after engine has cooled down.
Only perform this work after engine has cooled down.
Necessary preliminary tasks:
- Follow instructions for working on cooling system.
- Remove fan cowl with electric fan.
- Remove front splash guard.
- Drain coolant.
- Detach heat exchanger for automatic transmission from radiator.
- Unlock and detach all coolant hoses on radiator.
Remove radiator (1) upwards in direction of arrow.
Installation:
Ensure correct seating in side guides.
Top up coolant and vent cooling system.
Check for leaks.