64 11 902 Replacing sensor fan for interior temperature

WARNING: This page is about a different car, the 2010 BMW 535xi, 2009 BMW 535xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

REMOVE CONTROL PANEL FOR HEATER - A/C SYSTEM .

Release screws (1).

Pull out sensor blower for interior temperature (2) in direction of arrow.

Installation note:

Make sure pins (3) are correctly seated in base (4).

Fig 1: Pulling Sensor Blower For Interior Temperature

Courtesy of BMW OF NORTH AMERICA, INC.