32 33 001 Removing and installing/replacing steering wheel (from 03/2007)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 528xi, 2009 BMW 535xi, 2009 BMW 528xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Wheel/chassis alignment is not necessary after the steering wheel has been removed and installed or replaced.
Necessary preliminary tasks:
- Remove AIRBAG UNIT
- Replacement only: Remove RETAINING PLATE FOR MULTIFUNCTION STEERING WHEEL SWITCH
Move wheels/steering wheel into straight-ahead position.
Disconnect plug connection (1).
Release screw (2) and remove steering wheel.
Installation:
Make sure connecting lead(s) is/are correctly laid.
Tightening torque 32 33 1AZ .
IMPORTANT:
Risk of damage!
Driver (1) must engage in opening (2).
Driver (1) must engage in opening (2).
Installation:
Align steering wheel using grooved toothing to steering column and attach.
Replacement: