32 31 241 Replacing adjusting lever for steering column (steering column with Nacam clamp)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 528xi, 2009 BMW 535xi, 2009 BMW 528xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove LOWER SECTION OF STEERING COLUMN TRIM
- Remove TRIM PANEL FOR PEDAL ASSEMBLY .
Unclip adjusting lever.
Installation:
Align adjusting lever to steering column and attach straight to prevent the locks from being damaged.
Check locks after attachment, replace adjusting lever if necessary.