33 52 Shock Absorbers

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUES SPECIFICATION (SHOCK ABSORBERS)

	Type	Thread	Tightening specification	Measure
1AZ Shock absorber to trailing arm/ wheel carrier/ swinging arm/ support arm/ control arm (tighten in normal position )	E12, E23, E24, E28, E32, E34, E38, E52			127 Nm
	E21			54 Nm
	E30, E36/7, E36/5			77 Nm
	E31			115 Nm
	E36, E46, E83, E85, E86	M12		100 Nm
	E39, E53	M14	Replace nut	127 Nm
	E60, E61, E63, E64, E65, E66	M14	Replace screw	165 Nm
	E67	M16	Replace screw	250 Nm
2AZ Shock absorber piston rod on thrust bearing	E21, E30			15 Nm
	E23, E24, E28, E34			25 Nm
	E36, E46, E83	M10	Replace nut	14 Nm
	E38, E39, E52	M10	Replace nut	23 Nm
	E38, E39	M14	Replace nut	27 Nm
	E53, E60, E63, E64, E65, E66, E67	M12	Replace nut	27 Nm
	E61	M12	Replace nut	28 Nm
	E85, E86	M10 x 1	Replace nut	13 Nm
3AZ Support on body/rear axle carrier	E36, E38	M8	Replace nut	24 Nm
	E39	Nut and bolt yellow chrome-plated	Replace nut	24 Nm
	E39	Nut and bolt silver-grey	Replace nut	28 Nm
	E46, E52, E60, E63, E64, E65, E66, E67	M8	Replace nuts	28 Nm
	E53	M10	Replace nuts	56 Nm
	E83, E85 / S54, E86 / S54	M8	Replace nuts	24 Nm
	E85 / except S54, E86 / except S54	M8	Replace nuts	27 Nm