33 21 Output Shaft
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATION (OUTPUT SHAFT)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Output shaft to rear axle differential and drive flange | ||||
| Hexagon socket screw | E30, E32, E34 | M10 x 50 10.9 | Replace screws | 60 Nm |
| Torx screw without ribbed teeth | E30, E31, E32, E34, E36, E38 | M10 x 50 10.9 (black) | Replace screws | 60 Nm |
| Torx screw | E36, E39, E46 | M8 x 40 (black) | Replace screws | 64 Nm |
| E36, E39, E46, E60, E83, E85 | M8 x 40 (silver) | Replace screws | 52 Nm | |
| E36 / M54 / Z3 3.0i, E46 | M10 x 23 10.9 (silver) | Replace screws | 85 Nm | |
| E30, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E83, E85, E86 | M10 (silver) | Replace screws | 80 Nm | |
| E36 / Z3 2.8i, E36 / S50 / S52 / S54, E46 / S54, E85 / S54, E86 / S54 | M10 x 46 10.9 (black) | Replace screws | 100 Nm | |
| E31, E38, E39, E60, E63, E64 | M12 x 50 10.9 (black) | Replace screws | 135 Nm |