18 20 Exhaust system suspension
WARNING: This page is about a different car, the 2010 BMW 535i, 2009 BMW 535i, and 2008 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.
EXHAUST SYSTEM SUSPENSION - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Clamp to front pipe holder | N54 | M8 x 49 | 19 Nm | |
| 2AZ Bracket, primary cat., to primary cat. | N54 | BM8 | 19 Nm | |
| 3AZ Front pipe holder to retaining plate | N54 | M8 x 20 | 19 Nm | |
| 4AZ Assembly, exhaust system, to assembly, suspension, rear muffler | N54 | M8 | 19 Nm | |
| 5AZ Assembly, retaining plate, to transfer case | N54 | M8 x 35 | 19 Nm | |
| 6AZ Preliminary pipe bracket to transmission | N54 | M8 x 16 | 19 Nm | |
| 7AZ Assembly, retaining plate to transmission | N54 | BM8 | 21 Nm | |
| 8AZ Exhaust system to front pipe bracket | N54 | BM8 | 21 Nm |