13 11 Carburetor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
CARBURETOR - TIGHTENING TORQUES SPECIFICATION
| Type | thread | tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Carburetor to intake manifold | M10 / M20 / M30 | 10 Nm | ||
| 2AZ Carburetor to insulating flange | M10 / M20 / M30 | 10 Nm | ||
| 3AZ Insulating flange to intake manifold | M10 / M20 / M30 | 10 Nm | ||
| 4AZ Idling shut off valve; max. | M10 / M20 / M30 | 5 Nm | ||
| 5AZ Flow valve; max. | M10 / M20 / M30 | 28 Nm | ||
| 6AZ Throttle valve assembly to float housing; max. | M10 / M20 / M30 | 9 Nm | ||
| 8AZ Throttle valve control to carburetor; max. | 2BE | 3 Nm | ||
| 9AZ Warm-up regulator to engine | M10 / M20 / M30 | 23 Nm |