11 36 Variable Camshaft Control
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
VARIABLE CAMSHAFT CONTROL - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS with sensor wheel to inlet and exhaust camshafts | N54 | M10 x 94 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180° | |||
| 2AZ Non-return valve VANOS to cylinder head | N54 | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N54 | M6 x 12 | 10 Nm |