11 61 Intake manifold
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
INTAKE MANIFOLD - TIGHTENING TORQUES SPECIFICATION
| Type | thread | tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Intake manifold on cylinder head | All | M8 | 22 Nm | |
| All | M7 | 15 Nm | ||
| All | M6 | 10 Nm | ||
| 2AZ Soundproofing hood to holder | M60/1 / M60/2 / M62 | M6 | 8 Nm |
INTAKE MANIFOLD - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screw (1x) Air intake manifold to cylinder head |
N54 | M7 x 50 | 15 Nm | |
| 2AZ Hexagon nut (6x) Air intake manifold to cylinder head |
N54 | AM7 | 15 Nm | |
| 3AZ Hose clamp (1x) Gaiter, rear charge-air duct to front charge-air duct. |
N54 | L65-72 | 3 Nm |