11 24 Connecting Rod and Bearing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

CONNECTING RODS AND BEARINGS - TIGHTENING TORQUES SPECIFICATION

	Type	Thread	Tightening specification	Measure
1AZ Connecting rod bolts	N54	M9	Replace, wash and oil screws
			Jointing torque	20 Nm
			Torque angle	70°