11 11 Engine Block, Cylinder Crankcase N54 B30
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE N54 B30 - TECHNICAL DATA
| Bore Ø stage 0 (1) | mm | 84.000+0.014 | ||
| Bore Ø stage 00 (1) | mm | |||
| Bore Ø stage 1 (1) | mm | 84.250+0.014 | ||
| Permitted out-of-round of cylinder bore (1) | mm | 0.005 | ||
| Permitted conicity of cylinder bore (1) | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||