11 12 Cylinder Head with Cover N54 B30
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD WITH COVER N54 B30 - TECHNICAL DATA
| Cylinder head height: Original dimension | mm | 112.00 ± 0.05 |
| Machining limit | mm | 111.70 ± 0.05 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of installed valve guide | ||
| Original inlet valve | mm | 5.0+0.012 |
| Original exhaust valve | mm | 6.0+0.012 |
| Tilt clearance, maximum (wear between valve and valve guide) | mm | cannot be measured |
| Bearing of camshaft | ||
| Guide bearing (width) | mm | 22.000...22.052 |