66 31 016 Removing and installing/replacing long range sensor (LRR sensor) (from build date 03/2007)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Lever out trim (1) with special tool 00 9 317 and remove.

Fig 1: Removing Trim With Special Tool 00 9 317

G05479164

Courtesy of BMW OF NORTH AMERICA, INC.

Tape off bumper in working area (1) with yellow plastic adhesive tape.

Unclip long range sensor (2) from mounting.

Installation:

Make sure long range sensor (2) is correctly seated.

Fig 2: Identifying Bumper In Working Area With Yellow Plastic Adhesive Tape And Long Range Sensor

G05479162

Courtesy of BMW OF NORTH AMERICA, INC.

Secure long range sensor (1) against falling out.

Disconnect plug connection (2) and remove long range sensor (1).

Fig 3: Identifying Long Range Sensor And Plug Connection

G05479166

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out LRR SENSOR ADJUSTMENT using BMW diagnosis system.
Carry out PROGRAMMING/CODING .