65 12 250 Removing and installing/replacing headphones module

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect NEGATIVE BATTERY LEAD
If necessary, remove emergency wheel

Take off cover for control units (1).

Installation:

Make sure cover for control units (1) is correctly seated on locating pins (2).

Fig 1: Identifying Control Units And Pins

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Illustrations show removal from the E60.

Unfasten plug connection (1) and disconnect.

Remove headphones module (2) upwards out of mounting for control units (3).

Fig 2: Removing Headphones Module

Courtesy of BMW OF NORTH AMERICA, INC.