65 77 016 Removing and installing/replacing airbag control unit (build date from 09/2005)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Note AIRBAG SAFETY INSTRUCTIONS !
Incorrect handling can activate airbag and cause injury.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).

Necessary preliminary tasks:

Disconnect BATTERY NEGATIVE LEAD
Remove CENTER CONSOLE

If necessary, remove rear compartment air duct and disconnect associated plug connections.

Disconnect plug connection (1).

Release screws (2) and remove airbag control unit (3).

Tightening torque 65 77 1AZ .

Fig 1: Identifying Plug Connection, Screws And Airbag Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.