LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1741 (Heating And Air Conditioning - Repair (E60)) >> Heater With Operation >> 64 11 991 Removing and installing/replacing sensor for automatic recirculated air control (build date from 03/2007)

64 11 991 Removing and installing/replacing sensor for automatic recirculated air control (build date from 03/2007)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect plug connection (1).

Unlock sensor (2) in direction of arrow and remove.

Fig 1: Identifying Plug Connection And Sensor
G05478953Courtesy of BMW OF NORTH AMERICA, INC.

Lug (1) must not be damaged.

Installation: 

Make sure sensor is correctly seated in guide (2).

Fig 2: Identifying Sensor Guide And Lug
G05478954Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals