64 11 326 Replacing the button caps of the heating and air conditioning system control panel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 341

Tape area (1) around the button caps with adhesive tape.

Fig 1: Tape Area Around Button Caps

Courtesy of BMW OF NORTH AMERICA, INC.

Press blower rocker switch (1) on one side and pry it off on the other side with special tool 00 9 340.

Fig 2: Press Blower Rocker Switch On One Side

Courtesy of BMW OF NORTH AMERICA, INC.

Pry off remaining button caps (1) with special tool 00 9 340.

Fig 3: Pry Off Remaining Button Caps

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in button caps (1) into operating unit. Remove adhesive tape.

Fig 4: Clip In Button Caps Into Operating Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Check function of the air conditioning.