64 53 518 Replacing desiccant insert for A/C system (condenser removed)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for HANDLING R 134a REFRIGERANT
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for HANDLING REFRIGERANT OIL .
Refrigerant circuit is under high pressure!
Follow safety instructions for HANDLING R 134a REFRIGERANT
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for HANDLING REFRIGERANT OIL .
IMPORTANT:
Risk of damage!
Restart engine only when A/C system has been correctly filled.
Follow INSTRUCTIONS for opening and replacing parts in refrigerant circuit!
If A/C system is opened for more than 24 hours:
Replacing drier insert for A/C system
Restart engine only when A/C system has been correctly filled.
Follow INSTRUCTIONS for opening and replacing parts in refrigerant circuit!
If A/C system is opened for more than 24 hours:
Replacing drier insert for A/C system
Remove protective cap (1) from condenser for A/C system (2).
Press sealing cap (1) inwards and remove circlip (2).
Remove protective cap (2) from condenser for A/C system (3) with aid of an inserted screw (1).
Installation:
Replace sealing rings (1) of sealing cap (2) and coat with suitable refrigerant oil.
Remove desiccant insert for A/C system (1) in direction of arrow from condenser for A/C system (2).
After installation:
- Add final details to vehicle
- EVACUATE AND FILL A/C SYSTEM