LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1737 (Body Equipment - Repair - E60) >> Trunk Latch Locks >> 51 24 391 Replacing rubber mount on trunk lid support

51 24 391 Replacing rubber mount on trunk lid support

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Screw off both rubber buffers (1).

Installation: 

Adjust both rubber buffers (1) (work is described in "ADJUSTING REAR LID LOCK ").

Fig 1: Adjusting Both Rubber Buffers
G04767807Courtesy of BMW OF NORTH AMERICA, INC.