51 16... Removing and installing / replacing front insert (on storage compartment trim)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM FOR STORAGE COMPARTMENT

Security version:

Remove intercom system switch

Build date up to 03/2007:

Release screws (1) and remove insert (2).

Fig 1: Identifying Screws

G05503571

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully release pin (1) from catch (2) and remove decorative trim from insert (3).

Installation:

Pin (1) and catch (2) must not be damaged.

Fig 2: Releasing Pin From Catch

G05503572

Courtesy of BMW OF NORTH AMERICA, INC.

Build date from 03/2007:

Release screws (1) and remove insert (2).

Fig 3: Identifying Screws

G05503573

Courtesy of BMW OF NORTH AMERICA, INC.