51 11... Removing and installing/replacing front fog lamp trim (M aerodynamic kit)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

64 1 020

Partially fit special tool 64 1 020 as illustrated.

Lever out fog lamp trim (2) at retaining lugs (1).

Feed fog lamp trim (2) out of outer bracket (3) and remove from bumper trim (4).

Fig 1: Identifying Fog Lamp Trim At Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) and outer guide (2) of fog lamp trim (3) must not be damaged.

Fig 2: Identifying Retaining Lugs And Outer Guide Of Fog Lamp Trim

Courtesy of BMW OF NORTH AMERICA, INC.