51 11... Removing and installing/replacing cover for headlight washer unit on left

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 341

Version without headlight washer unit (SRA):

With bumper trim fitted, unclip cover (1) with special tool 00 9 341 .
With bumper trim removed, unclip cover (1) from inside.

Fig 1: Unclipping Cover With Special Tool
Courtesy of BMW OF NORTH AMERICA, INC.

Press catch together.

Feed cover (1) out of carrier (2).

Fig 2: Identifying Cover And Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Version with headlight washer unit:

Carefully open out cover (1).

Press catches (2) together and feed out cover (1) in outward direction.

Fig 3: Identifying Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Removing lever for headlight washer unit cover:

Remove BUMPER TRIM .

Release spring (1) and remove lever (2).

Fig 4: Removing Lever

Courtesy of BMW OF NORTH AMERICA, INC.