LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1737 (Body Equipment - Repair - E60) >> Engine Compartment Lid Latch Locks >> 51 23 265 Removing and installing/replacing left or right gas strut for engine compartment lid

51 23 265 Removing and installing/replacing left or right gas strut for engine compartment lid

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Risk of injury and damage!

For the following tasks, you must take the appropriate measures to support the engine compartment lid.

As an alternative, you can enlist the help of a second person to hold the engine compartment lid.

Raise engine compartment lid.

Disassemble BALL SOCKET (1). 

Unclip gas spring strut (3) in direction of arrow from ball stud (2), top and bottom.

Detach gas pressurized prop.

Fig 1: Removing Gas Spring Strut From Ball Stud
G06854075Courtesy of BMW OF NORTH AMERICA, INC.