51 23 160 Removing and installing/replacing arrester hook on engine compartment lid

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Raise engine compartment lid.

Release screws (1) and remove arrester hook (2).

Tightening torque 51 23 1AZ .

Fig 1: Identifying Screws And Arrester Hook

Courtesy of BMW OF NORTH AMERICA, INC.