LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1736 (Integrated Suspension Systems - Repair) >> Rear Control And Suspension >> 37 12 012 Carrying out ride-height-calibration

37 12 012 Carrying out ride-height-calibration

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Ride-height calibration must be carried out after the following work:

  • Replacement of control unit
  • Replacement of wiring harness
  • Replacement of ride-height sensor

Connect BMW diagnosis system.

Switch on ignition.

Carry out ride-height calibration (menu item: "Service function").

Version with Run Flat Indicator: initialize RUN FLAT INDICATOR

Version with Tyre Pressure Control: carry out RESETTING

scientia non olet · About LEMON Manuals