LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1736 (Integrated Suspension Systems - Repair) >> Connecting Lines >> 37 13 100 Removing and installing/replacing pressure lines for oscillating motor/front axle >> Notes

37 13 100 Removing and installing/replacing pressure lines for oscillating motor/front axle: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove FRONT PRESSURE LINES (1)  (from oscillating motor to junction I at side in wheel arch)

Remove REAR PRESSURE LINES (2)  (from junction I to valve block)

Fig 1: Identifying Front And Rear Pressure Lines
G04760794Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals