34 52 550 Removing and installing / replacing DSC sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
Necessary preliminary tasks:
- Remove right front seat. See REMOVING AND INSTALLING LEFT OR RIGHT FRONT SEAT (NORMAL/SEMI-ELECTRIC) or REMOVING AND INSTALLING LEFT OR RIGHT FRONT SEAT (COMFORT)
- Remove FRONT INSIDE ENTRANCE COVER STRIP
- Lift carpet and fold back to one side
NOTE:
The yaw sensor comprises the function of the transversal-acceleration sensor and the yaw sensor.
Unlock plug connection.
Installation:
Make sure plug connection locks correctly.
Release screws (1) and remove rotation rate sensor.
Installation:
Tightening torque 34 51 3AZ .
Carry out calibration/adjustment of DSC sensor.