33 55 041 Replacing anti-roll bar link for anti-roll bar on left or right
WARNING: This page is about a different car, the 2010 BMW 535i, 2009 BMW 535i, and 2008 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.
Release nut (1); if necessary, grip at Torx socket.
Installation note:
Replace self-locking nut.
Tightening torque:
| Stabilizer link on anti-roll bar/swinging arm (E60) |
M10 | 65 Nm |
| M12 | 100 Nm |
Release nut (2); if necessary, grip at Torx socket.
Remove anti-roll bar link.
Installation note:
Replace self-locking nut.
Tightening torque:
| Stabilizer link on anti-roll bar/swinging arm (E60) |
M10 | 65 Nm |
| M12 | 100 Nm |