33 55 040 Replacing stabilizer links for stabilizer
WARNING: This page is about a different car, the 2010 BMW 535i, 2009 BMW 535i, and 2008 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.
Release nut (1); if necessary, grip at Torx socket.
Installation:
Replace self-locking nut.
Tightening torque 33 55 2AZ
.
Release nut (2); if necessary, grip at Torx socket.
Remove stabilizer link.
Installation:
Replace self-locking nut.
Tightening torque 33 55 2AZ
.
Courtesy of BMW OF NORTH AMERICA, INC.