52 24 045 Removing and installing/replacing backrest frame

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove backrest cover with PADDING

Replacement only:

If necessary, release all screws and remove parts:

TIGHTENING TORQUE SPECIFICATION

No.	Description	Tightening torque
1	Head restraint mount	52 24 2AZ
2	Armrest lock	52 24 3AZ
3	Backrest lock	52 24 4AZ

Fig 1: Locating Head Restraint Mount, Armrest Lock And Backrest Lock

Courtesy of BMW OF NORTH AMERICA, INC.