52 13 040 Removing and installing/replacing outer cover on left or right front seat (normal/semi-electric)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Pull lever forward to remove:

If necessary, lever out lower locking point (1) from rear with a screwdriver.

Unscrew bolt (2).

If necessary, move seat fully forwards and upwards.

Fig 1: Identifying Lower Locking Point And Bolts

G05504140

Courtesy of BMW OF NORTH AMERICA, INC.

Remove trim:

Unclip at top edge
Unclip at rear towards top side
Pull on belt opening
Unlock lugs
Carefully remove trim towards front

Unfasten plug connection.

Fig 2: Removing Trim

G05504141

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Remove switch. See REPLACING SEAT ADJUSTMENT SWITCH COMBINATION (SEMI-ELECTRIC FRONT SEAT) or REMOVING AND INSTALLING/REPLACING SWITCH FOR FRONT LUMBAR SUPPORT

Installation:

Retaining clips and tabs must not be damaged.

Fig 3: Identifying Clips And Tabs

G05504142

Courtesy of BMW OF NORTH AMERICA, INC.