52 17 380 Removing and installing/replacing head restraint mount on left or right front seat (comfort)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove HEAD RESTRAINT .
Remove BOTH REAR panels on front seat backrest.

Detach retaining points (1).

Fig 1: Identifying Retaining Points

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten cable clip (1).

Disconnect plug connections (2).

Feed out AKS carrier (3) towards bottom.

Fig 2: Identifying Plug Connections And Cable Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Installation:

Guide pins (2) of head restraint mount must engage in openings on AKS carrier.

Feed out head restraint mount (3) sideways.

Fig 3: Identifying Guide Pins And Screws

Courtesy of BMW OF NORTH AMERICA, INC.