52 17 035 Removing and installing/replacing gearing for head restraint adjustment
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove SHAFT for head restraint adjustment
Release screws (4) on left and right.
Tightening torque: 52 10 21AZ .
Remove retainer (1) on left and right.
Remove gearing (2) on left and right straight towards front.
Installation:
To ensure identical adjustment of gearings (2), carry out following work step on both gearings:
- Unscrew component (5) until threaded rod (6) is flush with edge (3).