23 11 615 Replacing guide tube for clutch release unit (GS6-53BZ/DZ)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (transmission removed)

Necessary preliminary tasks:

Remove CLUTCH RELEASE BEARING AND RELEASE LEVER from guide tube

Release screws.

Remove guide tube (1).

Installation:

Clean thread.

Install screws with Loctite 243.

Tightening torque 23 11 2AZ .

Fig 1: Identifying Guide Tube And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Remove sticker (1) and adhesive with a suitable solvent.

Fig 2: Identifying Sticker

Courtesy of BMW OF NORTH AMERICA, INC.