22 11 001 Replacing right engine mount (N54)

WARNING: This page is about a different car, the 2010 BMW 535i, 2009 BMW 535i, and 2008 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Lower front axle support . See LOWERING/RAISING FRONT AXLE CARRIER

Release screws (1) and remove engine mount (2).

Tightening torque 22 11 1AZ .

Fig 1: Identifying Screws And Engine Mount

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lug (1) of engine mount must point to middle of vehicle.

Engine mount designations:

Right engine mount

Even component number

Left engine mount

Odd component number

Fig 2: Identifying Lug
Courtesy of BMW OF NORTH AMERICA, INC.